No Hot Water? Common Causes & Tips to Deal with Yourself
Order RepairWhat are your thoughts about How to Troubleshoot and Repair an Electric Water Heater?
Numerous modern homes utilize an electric hot water heater for their heating unit, due to its ease as well as convenience of use. Nevertheless, much like any other electrical home appliances, problems might arise with its usage, suddenly. It can be really irritating to get up to a chilly shower instead of a warm one or having your bathroom with water that isn't warm sufficient or even too warm. Whatever the instance may be, water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible remedies to your hot water heater issues. There are a number of variables that can trigger a lot of these troubles, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the issue is, getting it fixed need to not position way too much of a concern if you follow these actions:
Check Your Power Supply:
As standard as this may appear, it is very essential. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Check if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, just transform it off and on once more. Replace any type of busted or worn-out fuse. Examine the appliance with power after these modifications to see if it's now working.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, after that try looking into your burner if it is still working. Check each of your heating elements to make sure the issue isn't with any one of them. If any of them is malfunctioning, change that part and after that examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to check the temperature setups on your upper thermostat. Make sure the breaker is turned off before doing anything. Open up the access panel and press the red button for temperature reset above the thermostat. This must aid heat the water. Turn the breaker back on and also examine if the problem has been dealt with.
Call A Professional:
If after replacing all defective components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to contact an expert plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the instance might be, a specialist plumber would certainly aid address the trouble.
Verdict
Hot water heater troubles are not constantly significant. Most of them result from small problems like a blown fuse or damaged burner. Changing the malfunctioning components must work. Nevertheless, if you are still not able to resolve the issue, give a call to your nearest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a reader on How to Troubleshoot and Repair an Electric Water Heater, I think sharing that piece of writing was really useful. Are you aware of someone else who is very much interested in the subject? Why not promote it. Kudos for your time. Come back soon.
This Resource